The 6Pin power connector signal definition：
1．YELLOW：constant power +12V。
2．BLACK：Ground to chassis。
3．GREEN：reverse camera trigger signal [reverse=12V]， to rear lamp。
4．White：switch signal input，>2V for triggering.[ max.25V]
Grey：this signal is not used.
RED：=ACC, this interface is not using it, there is a ACC inside the ribbon cable which is connected to the monitor,
when monitor ON, this interface works by showing the LED on.
DIP switch settings.
RGB/AV1/Av2 INPUT ENABLED
Rear camera=AV4[Green wire=12V]
[installing extra camera]
No function [ the 7th DIP must stay UP side(=off), otherwirse the interface goes into
factory testing mode by displaying color bar on screen.]
Accessories
Interface for MFD3
One interface box
MFD3 daughter board，with 30p-1.0pitch-50CM
ribbon, and one 50P-10cm ribbon.
RGB input wire
Free Download Interface for Volkswagen，Skoda MFD3，RCD510 User's manual
Get the file Download here | PDF-HOME